Build your own Prox...
 
Share:
Notifications
Clear all

Build your own Proxmox Home Lab Server with MINISFORUM BD795m

Page 3 / 3

Brandon Lee
Posts: 467
Admin
Topic starter
(@brandon-lee)
Member
Joined: 14 years ago

Pic of case, motherboard, and PSU:

case and power supply installed proxmox server build
Reply
Posts: 1
(@9bd6f9d72a40ab7143d6cc994663114f)
New Member
Joined: 11 hours ago

Hi @brandon-leeย 

Please share the IOMMU groups when you are ready with the build.
I am checking the same motherboard and I am interested if it will be possible to Passthrough half of the USB's to VM.

I know that Passthroughย  of the PCI-e is available but don't have the groups.
Thank you!ย 

Reply
1 Reply
Brandon Lee
Admin
(@brandon-lee)
Joined: 14 years ago

Member
Posts: 467
Brandon Lee
Posts: 467
Admin
Topic starter
(@brandon-lee)
Member
Joined: 14 years ago

It's alive!ย 

hardware is running with the bd795m processor

Wanted to share the power draw. There is a setting in the bios of the BD795M called Core Performance Boost. With this turned on, it idles aroundย 40 wattsย and when I run the S-TUI utility to stress all cores, it bursts toย 148 watts. However, if you turn this off, it idles aroundย 27 wattsย in Proxmox and full load with 32 logical threads running 100% it only drawsย 67watts.

core performance boost setting enabled
core performance boost setting disabled
idle with the core performance boost on
100 percent cpu usage with core performance boost off
100 percent cpu usage with core performance boost on

ย 

Reply
Page 3 / 3